Automotive Electrical Phenolic Compound

Automotive Electrical Phenolic Compound

Model 7802-5 is a thermoset phenolic compound developed for molded automotive electrical components, processed by injection or transfer molding. It is targeted at under-hood and on-vehicle parts that must hold mechanical structure, electrical insulation, and flame resistance while seeing elevated temperatures, engine vibration, and thermal cycling.
Send Inquiry
Description

Product Description

Model 7802-5 is a thermoset phenolic compound developed for molded automotive electrical components, processed by injection or transfer molding. It is targeted at under-hood and on-vehicle parts that must hold mechanical structure, electrical insulation, and flame resistance while seeing elevated temperatures, engine vibration, and thermal cycling. The grade is tuned to the harsh duty of automotive electrical environments rather than bench-test room conditions, where a standard appliance grade would not hold up over years of heat cycles.

 

Under-hood parts are not chosen on a single datasheet row - they have to survive heat cycles, engine vibration and the electrical field around the component. Naso works from the buyer's part drawing and operating-environment description, presses a sample on the equivalent tool, and validates shrinkage and insulation behavior before bulk release. That application-specific matching, rather than a generic grade swap, is what lets a Tier supplier move from sample to PP with confidence that the powder will hold up in the real thermal-electrical environment.

 

Applications

Under-hood electrical housings and covers. Parts near the engine see continuous heat plus electrical load. The ≥170°C HDT, V-0 rating and ≥10¹¹ Ω surface resistance give a documented base for the thermal and electrical envelope.

 

Connector and insulator bodies for vehicle wiring. Wiring connectors need insulation plus impact resistance during assembly and vibration. The 1.5 / 5.5 kJ/m² notched and unnotched Charpy values support that duty.

 

Sensors and solenoid structural parts. Small molded housings that must hold tight dimensions around a metal insert. The narrow 0.40–0.60% shrinkage band helps control insert-to-bore clearance on repeat production.

7

Customization

Material matching is based on the customer's part drawing, operating temperature and electrical requirements. Samples are pressed on tooling equivalent to the production setup. Within one 1,000 kg MOQ, adjacent grades or colors can be combined after discussion.

 

Packaging & Transportation

Export packaging is tailored to the chosen transport mode and handling chain. Trade terms supported: EXW, FOB and DDP.

 

FAQ

Q: Can we get a sample validated for our specific under-hood part?

A: Yes. Send the technical drawing or a physical prototype, plus the operating temperature and electrical requirements. Sample development takes about 30 days.

Q: What payment terms apply to automotive orders?

A: Standard orders: 30% advance, 70% before shipment. Custom-tuned grades: 100% in advance. Settlement currency can be RMB or US dollars.

Q: How do you handle quality on a reorder?

A: Production runs on automatic batching with DCS control; each batch is 100% inspected before packaging. Third-party inspection is accepted, and production photos or videos can be shared.

 

Specifications

Parameter

Specification

Color

Black

Model / Material Type

7802-5, automotive electrical phenolic molding compound

Molding Method

Injection molding or transfer molding

Flexural Strength

To Be Confirmed (pending factory verification; source records differ)

Tensile Stress at Break

≥ 45 MPa

Charpy Impact (notched / unnotched)

≥ 1.5 / ≥ 5.5 kJ/m²

HDT (Ti 1.8) / Flammability

≥ 170 °C / UL94 V-0

Surface Resistance / tanδ (100 Hz)

≥ 10¹¹ Ω / ≤ 0.1

Shrinkage / Density / Water Absorption

0.40%–0.60% / 1.50–1.60 / ≤ 100 mg

 

 

Hot Tags: automotive electrical phenolic compound, China automotive electrical phenolic compound manufacturers, suppliers, factory