Product Description
Model 7802-5B is an injection-focused thermoset Bakelite compound, also suitable for transfer molding. It is tuned for the long flow paths, thin walls, and fast cycle times typical of injection presses - the kind of geometry that a general-purpose compression grade will not fill cleanly. The resin system is balanced to flow through runners and gates without scorching, then cure quickly enough to hold a tight cycle, while still delivering the heat, flame, and insulation envelope buyers expect from an electrical-grade phenolic.
Injection molding a thermoset is a two-way tuning problem: the powder has to flow through the runner and gate without scorching, then cure fast enough to hold the cycle. Naso's technical team reviews the customer's runner layout, gate size and wall thickness before sample pressing, and adjusts the flow grade accordingly rather than asking the molder to force a generic powder through a tight tool. That R&D-plus-process loop cuts short the common pain points - weld lines, short shots, over-flashing at the gate - and gets the cavity to a stable cycle faster.
Applications
High-volume injection-molded electrical parts. For parts running on multi-cavity injection tools, the flow-tuned grade and tight 0.40–0.60% shrinkage keep cavity-to-cavity weight and dimensions consistent, which is where generic compression grades often fail.
Insulation components near live circuits. Surface resistance above 10¹¹ Ω and V-0 flame rating suit coil bobbins, switch housings and connector bodies that must hold insulation under load.
Thin-wall and gated appliance parts. Thin sections and small gates need a powder that fills before gelation. The flow-grade tuning loop with the customer's runner design reduces short-shot and burn marks on delicate features.

Customization
Grade selection is done jointly with the customer's mold-flow and gate layout. Samples are pressed against the customer's actual drawings or prototype before release. Color and adjacent-grade mixing within one 1,000 kg MOQ is supported after discussion.
Packaging & Transportation
Export packaging is agreed according to transport mode and loading conditions. Trade terms supported: EXW, FOB and DDP.
FAQ
Q: Can you help tune the material to my existing mold?
A: Yes. Send the runner and gate layout, wall thickness and injection machine details; the technical team reviews flow and recommends the grade. Sample development takes about 30 days for a tuned formulation.
Q: What is the standard lead time?
A: Standard 7802-5B orders take about 7 days. Custom-tuned grades take about 20 days. Monthly capacity is around 1,500 tons.
Q: How do I track my order in production?
A: Photos or videos of production and packaging can be shared on request. The quality team completes a 100% pre-packaging inspection, and third-party inspection is accepted.
Specifications
|
Parameter |
Specification |
|
Color |
Black |
|
Model / Material Type |
7802-5B, injection-grade phenolic Bakelite compound |
|
Molding Method |
Primary: injection molding; also transfer molding |
|
Flexural Strength |
≥ 90 MPa |
|
Tensile Stress at Break |
≥ 55 MPa |
|
Charpy Impact (notched / unnotched) |
≥ 1.5 / ≥ 5.5 kJ/m² |
|
HDT / Flammability |
≥ 170 °C / UL94 V-0 |
|
Surface Resistance / tanδ (100 Hz) |
≥ 10¹¹ Ω / ≤ 0.1 |
|
Shrinkage / Density / Water Absorption |
0.40%–0.60% / 1.50–1.60 / ≤ 100 mg |
Hot Tags: injection grade bakelite compound, China injection grade bakelite compound manufacturers, suppliers, factory

