Product Description
Model 7830 is a reinforced, high-impact thermoset phenolic molding compound built for components that see mechanical shock during demolding, assembly, transport, and in-service use. Processed by injection or transfer molding, it steps up from general-purpose Bakelite grades where demolding cracks, edge chipping, and assembly-line failures are the buyer's real concern. The resin and filler system is tuned to absorb impact without sacrificing the heat resistance, flame rating, and electrical insulation that an electrical-grade phenolic must hold, making it the default choice for structural parts that carry load and survive knock rather than sit as inert housing.
For buyers running long injection programs, the number that matters most after first-article approval is batch-to-batch repeatability of impact strength. 7830T is compounded on an automatic batching line with DCS control over resin, filler and cure-ratio dosing, so the formulation window is held the same way on order 1 and order 50. That removes the common failure mode of impact grades - a slightly weaker batch that passes incoming visual check but cracks on the assembly line. Buyers therefore see fewer demolding cracks, lower field-failure risk and fewer surprise mold adjustments between reorders.
Applications
Structural electrical components under mechanical load. Switch bodies, contact supports and junction-block housings must survive insertion force and screw torque without chipping. The ≥30 kJ/m² unnotched impact and ≥150 MPa flexural strength give the part a safety margin during assembly and service.
Appliance and instrument parts exposed to vibration. In pumps, compressors and moving instrument mechanisms, a brittle grade cracks after months of vibration. 7830 combines impact toughness with ≥200°C HDT and V-0 flame rating, so the housing stays intact near motors and heating elements.
Machinery manufacturing brackets and supports. Metal-replacement brackets that carry static load and occasional shock benefit from the tight 0.25–0.50% shrinkage, which lets the mold shop hold mating dimensions across repeat batches without re-cutting tooling.

Customization
Flowability is reviewed against the customer's mold runner, gate and wall thickness before sample approval. Technical drawings or a physical prototype can be used to lock the grade. Color or adjacent-grade mixing within one 1,000 kg MOQ is available after discussion.
Packaging & Transportation
Export packaging is tailored to the agreed transport mode and handling chain. Supported trade terms: EXW, FOB and DDP.
FAQ
Q: What is the MOQ?
A: The minimum order quantity is 1,000 kg. Free samples are available before bulk production so the impact values can be validated on your own mold.
Q: How do you keep impact strength consistent between repeat orders?
A: Raw material dosing runs on an automatic batching system under DCS control, and every finished batch is 100% inspected before packaging. Third-party inspection is accepted on request.
Q: What payment terms do you offer?
A: Standard orders: 30% deposit in advance, 70% balance before shipment. Custom orders: 100% in advance. Settlement currency can be RMB or US dollars.
Specifications
|
Parameter |
Specification |
|
Color |
Black |
|
Model / Material Type |
7830, high-impact reinforced phenolic molding compound |
|
Molding Method |
Injection molding or transfer molding |
|
Flexural Strength |
≥ 150 MPa |
|
Tensile Stress at Break |
≥ 70 MPa |
|
Notched Charpy Impact |
≥ 2.0 kJ/m² |
|
Unnotched Charpy Impact |
≥ 30.0 kJ/m² |
|
HDT (Ti 1.8) / Flammability |
≥ 200 °C / UL94 V-0 |
|
Surface Resistance / tanδ (100 Hz) |
≥ 10¹⁰ Ω / ≤ 0.25 |
|
Shrinkage / Density |
0.25%–0.50% / 1.60–1.70 |
Hot Tags: high impact phenolic molding compound, China high impact phenolic molding compound manufacturers, suppliers, factory

