Product Description
Model 7601-H is a thermoset phenolic molding compound formulated for automotive ignition-system parts - distributor caps, rotor housings, and related ignition covers. These parts sit directly on the engine and must hold dimensional accuracy against heat, vibration, and the electrical field of the ignition coil. The compound is processed by injection or transfer molding and is tuned to reproduce the internal tower positions, insert bores, and sealing faces that the rotor and mounting flange demand, rather than sold as a generic insulation powder.
A distributor cap is a geometry-critical part: the internal tower positions, insert bores and sealing face all have to align with the rotor and the engine mounting flange. Naso builds from the customer's drawing - tower pitch, bore diameters, seal groove depth - and presses a sample on tooling that reflects those dimensions before bulk release. That drawing-driven loop matters because a phenolic grade with good electrical numbers will still fail if the internal towers sit off-pitch by a few tenths of a millimeter.
Applications
Distributor caps and rotor housings. The part must hold insulation around high-tension towers while surviving under-hood heat. The V-0 rating, ≥160°C HDT and ≥10¹⁰ Ω surface resistivity provide the documented electrical-thermal base.
Ignition coil housings and covers. Coil packs need a rigid housing that does not warp at running temperature. The 80 MPa flexural strength and 0.5–0.9% shrinkage band support stable bore and flange dimensions across batches.
Spark-plug well and ignition-related insulators. Insulators around high-voltage paths require both flame resistance and low dielectric loss; the tanδ ≤ 0.10 at 100 Hz keeps signal loss controlled.

Customization
Sample development follows the customer's ignition-part drawing or a physical prototype, with dimensional checks on tower pitch, insert bores and sealing faces. Within one 1,000 kg MOQ, adjacent ignition grades or colors can be combined after discussion.
Packaging & Transportation
Export packaging is agreed according to transport mode and part-handling requirements. Supported trade terms: EXW, FOB and DDP.
FAQ
Q: Can you match a specific distributor-cap geometry?
A: Yes. Send the technical drawing or a sample cap; sample development takes about 30 days and dimensional checks are run before bulk release.
Q: What is the MOQ and standard lead time?
A: MOQ is 1,000 kg. Standard grades ship in about 7 days; drawing-tuned samples and custom grades take about 20 days for production after sample approval.
Q: How is after-sales handled?
A: Quality or application questions are answered within 12 hours. Production photos or videos can be shared during manufacturing, and third-party inspection is accepted.
Specifications
|
Parameter |
Specification |
|
Color |
Black |
|
Model / Material Type |
7601-H, automotive ignition phenolic compound |
|
Molding Method |
Injection molding or transfer molding |
|
Flexural Strength |
≥ 80 MPa |
|
Tensile Stress at Break |
≥ 50 MPa |
|
Charpy Impact (notched / unnotched) |
≥ 1.3 / ≥ 5.0 kJ/m² |
|
HDT (Ti 1.8) / Flammability |
≥ 160 °C / UL94 V-0 |
|
Surface Resistivity / tanδ (100 Hz) |
≥ 10¹⁰ Ω / ≤ 0.10 |
|
Shrinkage / Density / Water Absorption |
0.5%–0.9% / 1.40–1.50 / ≤ 100 mg |
Hot Tags: distributor cap phenolic compound, China distributor cap phenolic compound manufacturers, suppliers, factory

