Compression Bakelite Powder

Compression Bakelite Powder

Model 7501 is a compression-molding grade of phenolic Bakelite powder. The material is loaded into a heated mold cavity and cured under platen pressure, which suits larger, simpler, or high-wear parts where an injection screw would be overkill — housings, plates, gears, and structural blocks that do not need the long-flow tuning of an injection grade.
Send Inquiry
Description

Product Description

Model 7501 is a compression-molding grade of phenolic Bakelite powder. The material is loaded into a heated mold cavity and cured under platen pressure, which suits larger, simpler, or high-wear parts where an injection screw would be overkill - housings, plates, gears, and structural blocks that do not need the long-flow tuning of an injection grade. The compound fills the open cavity under pressure rather than through a screw and gate, and is selected by buyers who already run compression or transfer equipment and want a forgiving, well-documented standard grade.

 

Compression and transfer molding reward a different powder rheology than injection: the compound must fill the open cavity under platen pressure, not through a screw and gate. Naso matches the grade to the molder's existing press, mold cavity and part weight, and presses a sample on that setup before bulk release - so the buyer is not discovering flash or cure mismatch on the first production run. That process-grade matching is the difference between a compression line that runs at a steady cycle and one that fights the powder every shift.

 

Applications

Compression-molded electrical insulation bodies. Larger insulator plates, terminal covers and brush-holder housings are often run on hydraulic presses. 7501's ≥10¹⁰ Ω insulation and ≥160°C HDT match the typical load on these parts.

 

Household and cookware phenolic components. Handles, knobs and large ferrules that are compression molded benefit from the powder's broad processing window and the 1.40–1.50 density, which keeps part weight predictable.

 

Machinery manufacturing wear and support parts. Wear pads, gear blanks and large brackets that do not justify injection tooling are cost-effective in compression, and the 0.5–0.9% shrinkage band supports mold compensation.

6

 

Customization

Grade matching is based on the customer's compression mold, platen size and part geometry. Technical drawings or a physical prototype are used for sample approval. Within one 1,000 kg MOQ, color or grade combinations can be arranged after discussion.

 

Packaging & Transportation

Export packaging is agreed per transport mode and handling. Supported trade terms: EXW, FOB and DDP.

 

FAQ

Q: Can I trial the powder on my existing compression mold?

A: Yes. Samples are provided before bulk production so the powder can be tested on your press and tool. Custom sample development takes about 30 days.

Q: What is the MOQ and lead time?

A: MOQ is 1,000 kg. Standard orders ship in about 7 days; custom grades in about 20 days. Monthly capacity is around 1,500 tons.

Q: Do you support third-party inspection?

A: Yes. Every batch is 100% inspected before packaging, and third-party inspection can be arranged. After-sales questions are answered within 12 hours.

 

Specifications

Parameter

Specification

Color

Black

Model / Material Type

7501, compression-molding Bakelite phenolic powder

Molding Method

Compression molding (also evaluated for transfer)

Flexural Strength

≥ 70 MPa

Tensile Stress at Break

≥ 40 MPa

Charpy Impact (notched / unnotched)

≥ 1.3 / ≥ 4.5 kJ/m²

HDT (Ti 1.8)

≥ 160 °C

Insulation Resistance / tanδ (100 Hz)

≥ 10¹⁰ Ω / ≤ 0.1

Shrinkage / Density / Water Absorption

0.5%–0.9% / 1.40–1.50 / ≤ 100 mg

 

 

Hot Tags: compression bakelite powder, China compression bakelite powder manufacturers, suppliers, factory