Product Description
Model 7601-C is a phenolic molding compound aimed at structural mechanical parts - components that carry load, guide motion, or replace small metal wear elements such as slides, cams, bushings, and small gear segments. It is processed by injection or transfer molding. Where a standard phenolic part runs against another surface and needs boundary lubrication, the filler system can be tuned toward self-lubricating packages (such as graphite or MoS₂) so the part wears in without external lubrication, while still holding the heat and insulation profile of a general-purpose grade.
When a phenolic part runs against another surface - a slide, a cam, a small gear or a bushing seat - the base resin is not always enough. For those duties, Naso can tune the filler system toward self-lubrication, discussing options such as graphite or molybdenum disulfide (MoS₂) loading against the buyer's speed, load and lubrication conditions. The grade is then sampled and validated on the actual mating part, so the buyer is not running a generic wear grade and hoping the friction coefficient holds up.
Applications
Guides, slides and wear pads. Parts that slide against another surface need low friction plus rigidity. The self-lubricating filler customization can reduce stick-slip where external lubrication is impractical.
Small gear and cam blanks. Non-metallic gears benefit from the phenolic's noise damping and electrical insulation; the tuned filler system supports smoother meshing and longer wear life in light-load drives.
Bearing retainers and structural mechanical brackets. Brackets that must also carry an insulating or flame-retardant function. The V-0 rating and ≥160°C HDT hold up near motors and gearboxes.

Customization
Filler systems such as graphite or MoS₂ are discussed against the buyer's speed, load and lubrication environment, and validated by sample on the actual mating part. Production follows the customer's drawings or a physical prototype. Within one 1,000 kg MOQ, adjacent grades or colors can be combined after discussion.
Packaging & Transportation
Export packaging is agreed with the buyer according to transport mode and handling conditions. Supported trade terms: EXW, FOB and DDP.
FAQ
Q: Can you customize the filler for a self-lubricating application?
A: Yes. Describe the mating material, surface speed, load and whether external lubrication exists. We discuss graphite / MoS₂ loading and develop a sample in about 30 days.
Q: What is the MOQ for a customized filler grade?
A: MOQ is 1,000 kg per grade. Within one MOQ order, different colors or adjacent models can be combined after discussion.
Q: How long does production take?
A: Standard grades take about 7 days. Custom filler-tuned grades take about 20 days after sample approval. Monthly capacity is around 1,500 tons.
Specifications
|
Parameter |
Specification |
|
Color |
Black |
|
Model / Material Type |
7601-C, mechanical-parts phenolic compound |
|
Molding Method |
Injection molding or transfer molding |
|
Flexural Strength |
≥ 80 MPa |
|
Tensile Stress at Break |
≥ 50 MPa |
|
Charpy Impact (notched / unnotched) |
≥ 1.3 / ≥ 5.0 kJ/m² |
|
HDT (Ti 1.8) / Flammability |
≥ 160 °C / UL94 V-0 |
|
Surface Resistivity / tanδ (100 Hz) |
≥ 10¹⁰ Ω / ≤ 0.10 |
|
Self-lubricating Fillers |
Graphite / MoS₂ loading available by discussion; exact grade To Be Confirmed after sample trial |
|
Shrinkage / Density / Water Absorption |
0.5%–0.9% / 1.40–1.50 / ≤ 100 mg |
Hot Tags: self-lubricating phenolic compound, China self-lubricating phenolic compound manufacturers, suppliers, factory

