Low VOC Phenolic Molding Compound

Low VOC Phenolic Molding Compound

Model 7830T is an ammonia-free, low-odor thermoset phenolic molding compound formulated for injection and transfer molding. Unlike standard Bakelite grades that release ammonia during cure, this resin system minimizes volatile emission from the mold cavity and from the finished part, while retaining the mechanical, thermal and electrical properties buyers expect from a reinforced phenolic.
Send Inquiry
Description

Product Description

Model 7830T is an ammonia-free, low-odor thermoset phenolic molding compound formulated for injection and transfer molding. Unlike standard Bakelite grades that release ammonia during cure, this resin system minimizes volatile emission from the mold cavity and from the finished part, while retaining the mechanical, thermal and electrical properties buyers expect from a reinforced phenolic. It delivers flexural strength of at least 150 MPa, tensile stress at break above 70 MPa, a heat deflection temperature (Ti 1.8) above 200°C and a UL94 V-0 rating. Surface resistance sits above 10¹⁰ Ω and the dielectric loss factor stays at or below 0.25. A tight molding shrinkage window of 0.25%–0.50% and density of 1.60–1.70 support reliable mold compensation and part-weight planning.

 

For buyers specifying parts that live inside sealed enclosures, indoor appliance cabinets or instrument housings, an ammonia-free formulation changes the value calculation. Lower fugitive emission keeps the molding floor more comfortable for operators and reduces the need for heavy venting or exhaust upgrades on existing injection presses. More importantly, the cured part does not carry the strong phenolic off-gassing that can condense on nearby metal surfaces, fog display windows, or reach the end user's nose when the appliance is first energized. That makes 7830T a direct material-selection upgrade for electrical insulation components, instrument housings and appliance internals where low odor and a clean indoor environment are part of the purchase specification.

 

Applications

Electrical instrument housings and sealed enclosures. Parts enclosed behind a front panel cannot vent to open air, so residual ammonia outgassing is noticed by the end user. The low-emission formulation keeps the internal air clean while the V-0 rating and ≥200°C HDT hold up near live components.

 

Indoor appliance internal structural and insulation parts. Inside air conditioners, water dispensers and kitchen appliance bases, operators and end users are close to the molded component. 7830T combines insulation performance with reduced odor, fitting applications where worker and consumer comfort is part of the acceptance criteria.

 

Heat-resistant mechanical and electrical components. Where a phenolic part must carry mechanical load near a heat source, the ≥150 MPa flexural strength and tight 0.25–0.50% shrinkage give mold shops a stable process window without the ammonia release typical of general industrial grades.

123

Customization

Material flowability is matched to the customer's mold structure, wall thickness and press. Buyers may send technical drawings or a physical prototype for sample molding before bulk production. Within one 1,000 kg MOQ, different colors or adjacent grades can be combined after discussion.

 

Packaging & Transportation

Export packaging is agreed with the buyer according to the chosen transport mode and handling conditions. Trade terms supported: EXW, FOB and DDP.

 

FAQ

Q: Can I get samples before placing a bulk order?

A: Yes. Free samples can be provided for trial molding. For a grade tuned to your own drawings or prototype, sample development takes about 30 days.

Q: What are the lead times for standard and custom orders?

A: Standard grades ship in about 7 days after order confirmation. Customized formulations or color-matched batches take about 20 days. Monthly output is around 1,500 tons, which protects repeat-order schedules.

Q: How is quality controlled before shipment?

A: The quality team runs a 100% inspection before packaging. Third-party inspection is accepted when requested, and production photos or videos can be shared during manufacturing. After-sales feedback is answered within 12 hours.

 

Specifications

Parameter

Specification

Color

Black (custom colors available after discussion)

Model / Material Type

7830T, ammonia-free low-VOC phenolic molding compound

Molding Method

Injection molding or transfer molding

Flexural Strength

≥ 150 MPa

Tensile Stress at Break

≥ 70 MPa

Heat Deflection Temperature (Ti 1.8)

≥ 200 °C

Flammability

UL94 V-0

Surface Resistance

≥ 10¹⁰ Ω

Dielectric Loss Factor (100 Hz)

≤ 0.25

Molding Shrinkage / Density

0.25%–0.50% / 1.60–1.70

 

 

Hot Tags: low voc phenolic molding compound, China low voc phenolic molding compound manufacturers, suppliers, factory