Product Description
Bright Red High-Gloss Phenolic Molding Compound is a thermoset Bakelite powder formulated specifically for molded appearance parts that must carry a bright, mirror-gloss red surface straight out of the mold. The resin system and pigment loading are tuned to reproduce a glossy finish on polished mold inserts - the surface must read clean and uniform across large visible areas such as appliance front panels, control-device housings, decorative structural covers, and instrument bezels. Beneath the cosmetic layer, the compound still meets the general-purpose phenolic profile for strength, heat, V-0 flame, and electrical insulation.
High-gloss appearance compounds are sensitive to mold polish, melt temperature, and cure time - a generic bakelite powder will not deliver the part gloss a polished insert is capable of. Naso runs this grade on the same DCS-controlled batching line, and the technical team works with the buyer on tooling polish recommendations, melt-temperature windows, and cycle time so the red surface stays consistent across a long production run. For a buyer whose product is judged on first-touch appearance, that co-tuned process removes the rejects caused by orange peel, flow lines, or dull red patches.
Applications
Appliance front panels and control bezels. A glossy red cosmetic surface comes straight from the mold, removing the painting step that would otherwise add cost, cycle time, and color-match rejects on visible appliance parts.
Control-device and switchgear appearance covers. V-0 flame resistance plus a high-gloss red finish is suitable for visible electrical enclosures in commercial or industrial equipment where appearance and safety rating both matter.
Instrumentation and decorative structural parts. Color-through red means chips or scratches on a glossy bezel do not expose a gray substrate, and the surface holds up to cleaning and handling across a long program.

Customization
Samples developed from the customer's technical drawing or physical prototype; technical guidance on mold polish, melt temperature, and cycle time is provided.
Different colors or approved grades can be combined within one 1,000 kg MOQ after discussion.
Grade tuning for large visible surfaces, gate location, and flow lines on cosmetic parts.
Packaging & Transportation
Export packaging is agreed with the buyer and tailored to transport and customer requirements.
Trade terms accepted: EXW, FOB, and DDP. Settlement in RMB or US dollars.
FAQ
Q: What makes this grade different from standard red phenolic?
A: The resin system and pigment loading are tuned to reproduce a mirror-gloss surface on polished mold inserts, so large visible red parts come out glossy without secondary painting.
Q: Can we run this on our existing polished tooling?
A: The technical team provides recommendations on melt-temperature windows, cure time, and tooling polish so the grade performs on your existing tooling; samples can be trialed before bulk orders.
Q: What quality checks apply to cosmetic parts?
A: Quality personnel run a 100% inspection before packaging, third-party inspection is accepted, and repeat orders are coordinated with existing production records. After-sales support responds within 12 hours.
Specifications
|
Parameter |
Specification |
|
Color / Surface Finish |
Bright red, high gloss |
|
Application |
Appearance housings, front panels, and decorative structural parts |
|
Molding Method |
Injection or transfer molding |
|
Flexural Strength |
≥80 MPa |
|
Tensile Stress at Break |
≥50 MPa |
|
Charpy Impact (notched / unnotched) |
≥1.3 kJ/m² / ≥5.0 kJ/m² |
|
Heat Deflection Temperature (Ti 1.8) |
≥160°C |
|
Flammability Rating |
UL94 V-0 |
|
Surface Resistivity / tanδ at 100 Hz |
≥10¹⁰ Ω / ≤0.10 |
|
Shrinkage / Density / Water Absorption |
0.5%–0.9% / 1.40–1.50 / ≤100 mg |
Hot Tags: high gloss phenolic molding compound, China high gloss phenolic molding compound manufacturers, suppliers, factory, Bright Red Phenolic Molding Compound, Coil Insulation Material, Commutator Phenolic Plastic, Electrical Bobbin Phenolic Plastic, Electrical Components Phenolic Plastic, Ev Battery Insulation

