Product Description
Model 7601-2 is a thermoset phenolic molding compound developed for small electronic and electrical components - connector housings, insulating clips, miniature supports, and housing accessories that carry tight geometric tolerances. It runs on injection or transfer molding. For miniature electronic parts, the controlling material attribute is not peak strength but how consistently shrinkage lands across a thin-wall cavity, so that holes, slots, and insert seats repeat to a tight window across thousands of shots. The grade is tuned for that dimensional repeatability rather than for maximum structural load.
Electronic parts are defined by drawings, not by part name. When a buyer sends us a 2D drawing with hole positions, wall thicknesses, and insert locations, our technical team first reviews whether 7601-2's flow front and shrinkage band will fill that geometry without short shots, flash, or dimensional drift - before any steel is cut. A physical prototype or a rejected cavity sample serves the same purpose. This drawing-based engineering loop matters for miniature parts because a 0.05 mm shrinkage drift that is invisible on a large housing is the difference between a connector that seats and one that does not. From a manufacturing-capability standpoint, the buyer is purchasing the compound together with the sample-engineering review - not just a bag of resin - so the first production cavity is developed against verified geometry rather than against a datasheet estimate.
Applications
Miniature connector housings and insulating clips. The 0.5%–0.9% shrinkage band is the controlling parameter for hole-to-pin alignment; it gives the molder a predictable starting compensation for miniature geometries.
Internal support brackets in electronic appliances. UL94 V-0 and surface resistivity ≥10¹⁰ Ω keep the part safe when it sits adjacent to live circuits.
Small housing accessories with metal inserts. Flexural strength ≥80 MPa and tensile at break ≥50 MPa support insert retention through assembly and service.

Customization
Samples are developed against the buyer's technical drawings or a physical prototype, with the technical team reviewing flow, shrinkage, and critical dimensions before tooling release. We supply phenolic compound only - no OEM branding, private label, or finished-part molding.
Packaging & Transportation
Export packaging is agreed by both parties according to component shape, packing arrangement, and transportation method. Trade terms supported: EXW, FOB, and DDP.
FAQ
Can you develop samples from my drawings?
Yes. Send the 2D drawing with hole positions, wall thickness, and insert locations (or a physical prototype), and our technical team will review flow and shrinkage before sample release.
What is the MOQ and lead time?
MOQ is 1,000 kg. Standard products take about 7 days; customized products about 20 days. Custom sample development is approximately 30 days.
Can I see production progress?
Photos or videos of production can be shared during order execution; a full inspection is completed before packaging.
Specifications
|
Parameter |
Specification |
|
Product Model |
7601-2 |
|
Material Type |
Phenolic molding compound for electronic/electrical parts, thermoset |
|
Molding Methods |
Injection molding or transfer molding |
|
Mechanical Properties |
Flexural strength ≥80 MPa; tensile stress at break ≥50 MPa; notched Charpy ≥1.3 kJ/m²; unnotched Charpy ≥5.0 kJ/m² |
|
Thermal and Flame |
Heat deflection temperature, Ti 1.8 ≥160°C; UL94 V-0 |
|
Electrical Properties |
Surface resistivity ≥10¹⁰ Ω; dielectric loss factor (tanδ) at 100 Hz ≤0.10 |
|
Physical Properties |
Molding shrinkage 0.5%–0.9%; water absorption ≤100 mg; density 1.40–1.50 |
Hot Tags: electronic encapsulation phenolic compound, China electronic encapsulation phenolic compound manufacturers, suppliers, factory, Circuit Breaker Housing Phenolic Plastic, Coil Insulation Material, Electrical Components Phenolic Plastic, Ev Battery Insulation, Switch Parts Phenolic Plastic, Wood brown Phenolic Molding Compound

