Pancake Maker Housing Phenolic Compound

Pancake Maker Housing Phenolic Compound

Model 7602-B1 is a thermoset phenolic molding compound developed specifically for electric griddle (pancake maker) housings and related enclosure components. Compared with small handle parts, a griddle housing presents a large visible molded surface, often with reinforcing ribs, mounting holes, and internal assembly positions that must survive repeated heat cycling near the cooking plate.
Send Inquiry
Description

Product Description

Model 7602-B1 is a thermoset phenolic molding compound developed specifically for electric griddle (pancake maker) housings and related enclosure components. Compared with small handle parts, a griddle housing presents a large visible molded surface, often with reinforcing ribs, mounting holes, and internal assembly positions that must survive repeated heat cycling near the cooking plate. The compound is processed by injection or transfer molding and is tuned for the dimensional stability and surface finish that a customer-facing appliance housing demands, rather than the hidden internal-component duty of a general-purpose grade.

 

Because the housing is the customer-facing exterior of a countertop appliance, surface finish and color read directly into brand perception. Our automatic batching system and DCS-controlled compounding keep pigment dispersion consistent batch to batch, so a matte black housing ordered in Q1 matches the same housing ordered in Q4 - the buyer does not absorb color-delta risk across replenishment cycles. For appliance brands that need a specific shade (warm black, soft gray, off-white), samples are prepared against the buyer's color target before bulk release; the same pigmented compound then runs through the same production line, so color drift does not appear between the first and last drum of a 1,000 kg order. From a manufacturing-capability standpoint, this consistency of appearance is what lets a buyer reorder without re-approving a new color batch.

 

Applications

Electric griddle / pancake maker housings. The housing must hold its flat panel shape near a heated plate and resist surface discoloration; 7602-B1's HDT ≥160°C and controlled 0.6%–0.9% shrinkage support large molded surfaces with integrated mounting holes.

 

Contact grill and sandwich press enclosures. These enclosures combine visible exterior panels with internal rib structures. The compound's flow behavior can be matched to rib density, wall thickness, and runner layout so the cavity fills without short shots on a deep-drawn housing.

 

Countertop appliance base plates and rear covers. Where a rigid, heat-resistant, electrically insulating structural panel sits behind a heated surface, the documented insulation resistance and shrinkage band support repeatable assembly-clearance control.

18-20

 

Customization

We develop samples against the buyer's technical drawings or a physical prototype of the housing, so flow, surface finish, and color target are confirmed on the actual geometry before bulk release. Within a single 1,000 kg MOQ, different colors or related housing grades can be combined after discussion, and the material grade can be matched to the buyer's wall thickness and runner design. We supply phenolic compound only - we do not provide OEM branding, private label, or finished-appliance molding.

 

Packaging & Transportation

Export packaging is agreed by both parties according to housing dimensions, stacking method, order quantity, and the chosen transportation mode. Trade terms supported: EXW, FOB, and DDP.

 

FAQ

What is the minimum order quantity?

MOQ is 1,000 kg. Free samples can be provided before bulk production so you can run them on your actual housing mold.

What are the lead times?

Standard phenolic grades take about 7 days to produce; customized grades take about 20 days. Custom sample development based on drawings or a prototype is approximately 30 days.

Can I mix colors or models in one order?

Yes - different colors or related compound models can be combined within the same 1,000 kg MOQ after discussion, so a multi-housing appliance buyer consolidates into one shipment.

 

Specifications

Parameter

Specification

Product Model

7602-B1

Material Type

Phenolic molding compound (Bakelite powder), thermoset

Molding Methods

Injection molding or transfer molding

Color

Black standard; custom shades available

Mechanical Properties

Flexural strength ≥80 MPa; tensile stress at break ≥50 MPa; notched Charpy ≥1.3 kJ/m²; unnotched Charpy ≥5.0 kJ/m²

Heat Performance

Heat deflection temperature, Ti 1.8 ≥160°C

Electrical Properties

Insulation resistance ≥10⁹ Ω; dielectric loss factor (tanδ) at 100 Hz ≤0.1

Physical Properties

Molding shrinkage 0.6%–0.9%; water absorption ≤100 mg; density 1.45–1.55

 

 

Hot Tags: pancake maker housing phenolic compound, China pancake maker housing phenolic compound manufacturers, suppliers, factory, Cookware Handle Phenolic Plastic, Cookware Pot Handle Phenolic Plastic, Electric Griddle Housing Phenolic Plastic, Electric Grill Handle Phenolic Plastic, Heat Resistant Molding Material, High Temperature Resistant Plastic Material