Mica Commutator Molding Compound

Mica Commutator Molding Compound

Model 7601-5B is a mica-filled phenolic molding compound engineered for commutator and collector-brush components — the cylindrical insulating backbone that anchors copper segments in DC motors, starter motors, generators, and power-tool armatures.
Send Inquiry
Description

Product Description

Model 7601-5B is a mica-filled phenolic molding compound engineered for commutator and collector-brush components - the cylindrical insulating backbone that anchors copper segments in DC motors, starter motors, generators, and power-tool armatures. A commutator sees centrifugal force at high RPM, frictional heat from carbon brushes, and continuous thermal cycling; the mica filler system is tuned to hold segment pitch, resist slotting wear, and maintain electrical isolation between bars under those conditions. The compound is processed by injection or transfer molding, with flow characteristics adjusted to commutator cup geometry, undercut channels, and armature press-fit tolerances.

 

Mica-filled commutator grades are not off-the-shelf bakelite - the filler loading, resin cure speed, and post-mold dimensional drift have to be co-developed with the armature builder's slotting, balancing, and brush-grade process. Naso's R&D team works with university and research-institute partners on filled phenolic systems, and the roughly 40,000 m² plant runs automatic batching with DCS control over filler dispersion. For a commutator buyer, that R&D partnership means the grade can be adjusted to your segment count, bar pitch, and operating environment rather than forcing your process to adapt to a generic compound.

 

Applications

DC motor and starter-motor commutators. The mica filler resists brush friction and holds bar-to-bar isolation under centrifugal force, which is the core requirement for starting motors that cycle hard and fast.

 

Power-tool armature cups. A structurally retained insulating cup around copper segments keeps segment pitch stable during high-speed balancing, reducing truing time and long-term bar wear.

 

Generator collector-brush insulating hubs. The thermal stability of a filled phenolic system supports continuous-duty rotating assemblies where the hub must not creep or lose press-fit interference over years of service.

2829

 

Customization

Samples are developed against the customer's technical drawing or physical prototype; mica loading and cure profile can be adjusted to the commutator tooling.

 

Mechanical and thermal values marked To Be Confirmed are finalized through sample testing against the approved technical data before bulk release.

 

Different colors or approved grades can be combined within one 1,000 kg MOQ after discussion.

 

Packaging & Transportation

Export packaging is agreed with the buyer and tailored to packing quantities and the chosen transport mode.

 

Trade terms accepted: EXW, FOB, and DDP. Settlement in RMB or US dollars.

 

FAQ

Q: Why are some specification values marked To Be Confirmed?

A: The supplied technical records contain conflicting mechanical, thermal, and physical values for this grade. Those values will be confirmed through approved data or sample testing before a bulk quote is finalized; UL94 V-0, surface resistivity, and tanδ are consistent across records.

Q: Can we get a sample for commutator tooling trials?

A: Yes. Samples are developed from your drawing or prototype, and a custom sample program typically takes about 30 days. Free samples can be supplied for initial evaluation.

Q: How is batch quality controlled for a rotation-critical part?

A: Quality personnel run 100% inspection before packaging, third-party inspection is accepted, and after-sales technical support responds within 12 hours for storage, molding, or application questions.

 

Specifications

Parameter

Specification

Product Model

7601-5B

Filler System

Mica-filled phenolic

Application

Commutator and collector-brush insulating components

Molding Method

Injection or transfer molding

Flexural Strength

To Be Confirmed (pending factory verification; source records ≥80 MPa vs ≥170 MPa)

Tensile Stress at Break

To Be Confirmed (pending factory verification; source records ≥50 MPa vs ≥80 MPa)

Heat Deflection Temperature

To Be Confirmed (pending factory verification; source records ≥160°C vs ≥200°C)

Flammability Rating

UL94 V-0

Surface Resistivity / tanδ

≥10¹⁰ Ω / ≤0.10 at 100 Hz

Shrinkage / Density

To Be Confirmed (pending factory verification; source records 0.5%–0.9% / 1.40–1.50 vs 0.2%–0.5% / 1.60–1.70)

 

 

Hot Tags: mica commutator molding compound, China mica commutator molding compound manufacturers, suppliers, factory, Bright Red Phenolic Molding Compound, Circuit Breaker Housing Phenolic Plastic, Coil Insulation Material, electrical insulation material, Purplish red Phenolic Molding Compound, Resin for Electrical Insulation